Drag to turn
CA-109
General Purpose Cement Tile Adhesive
Economical cement tile adhesive, C1E grade, for everyday wall and floor tiling.
- Pack
- 25 kg bag
- Colour
- Grey
- Standard
- C1E
- Group
- Tile fixing and grout
Where to use it
- Concrete, cement mortar bed, cement plaster, floor screed and brick masonry
What it does well
- High bond strength
- Long open time: 30 minutes
- Long correction time
- Easy to spread, non-sagging
- No odour, non-toxic
- Thick and thin bed
- Internal and external use
How to use CA-109
Four steps, as printed in the Aftek catalogue. Where the catalogue is silent we say so - ask for the data sheet.
The catalogue does not give this step. Ask us for the product data sheet before you start.
25-30%water, by weight of powder
25 kgpowder, one bag
- Mix one bag with 25 to 30% water by weight until uniform.
- Use the mix within about 25 minutes at 20°C.
- Spread the mixed adhesive on the wall or floor with a trowel.
- Comb it over the whole surface with a notched trowel, about 2 to 3 mm thick.
- Reference tile size: up to 10 cm, up to 10 mm thick. For other sizes ask us.
- Do not use on flexible substrates, fibre cement boards, gypsum boards or wood.
- 7-day tensile strength above 6 kgf/cm², shear strength above 10 kgf/cm².
Source: Aftek catalogue: All Products p.36, Redi-Mix p.3; nanpao.com CA-109
More in Tile fixing and grout
CA-110 High Performance Cement Tile Adhesive Polymer-rich cement tile adhesive, C2TE grade, for wet areas and demanding tiling. 25 kg paper bag, 5 kg plastic bag 
CA-004 Tile Grout Cement grout powder for tile joints up to 4 mm wide, in a range of colours. 25 kg paper bag, 1 kg plastic bag 
CS-009 Cement Filler Two-part bonding filler (liquid and powder) that makes new cement work stick to old, smooth or low-porosity surfaces. Liquid 6 kg drum, powder 20 kg bag 
CS-613 Water-based Epoxy Tile Grout and Adhesive Two-part water-based epoxy for grouting and bonding tiles: the strength of epoxy grout with the easy working of cement grout. 3 kg + 3 kg set