Drag to turn
CP-310
Water-based Polyurethane Waterproof Membrane
Water-based PU waterproofing paint for roofs and walls. Can be applied on a damp surface.
- Pack
- 5 gallon bucket
- Colour
- White, grey and customised colours
- Group
- Waterproofing
Where to use it
- Roofs of buildings, apartments, factories and schools
- Basement walls and exterior walls
What it does well
- Water-based, non-toxic and odourless
- Fine adhesion, very tough, highly elastic and long lasting
- Hydrophilic: can be applied on a damp surface
How to use CP-310
Four steps, as printed in the Aftek catalogue. Where the catalogue is silent we say so - ask for the data sheet.
The catalogue does not give this step. Ask us for the product data sheet before you start.
- Supplied ready to use - stir well before use.
The catalogue does not give this step. Ask us for the product data sheet before you start.
The catalogue does not give this step. Ask us for the product data sheet before you start.
Source: nanpao.com product page CP-310
Jobs it is part of
CP-310 in the order of the full Aftek system.
More in Waterproofing
CA-008 Dampscoat SL Two-part cement waterproofing layer (powder and liquid) for wet areas, used under tiles and stone. Liquid 8 L jerrican, powder 25 kg bag
CA-001 Waterproofing Cementitious Compound Liquid added to cement and sand mixes to improve water resistance, workability and strength. For interior and exterior use. 5 gallon bucket
CP-502 Water Copolymer Emulsion EVA copolymer latex mixed with cement to give a flexible, waterproof layer; also used as an elastic coating on cement walls. 5 gallon bucket
CP-503 Water Copolymer Emulsion Water-based waterproofing emulsion used with cement; tiles, paint or a protective slurry go over it easily. 5 gallon bucket
CA-107 Rockflex-BRH Bonding and waterproofing latex for floor screeds and repair mortars. 5 gallon bucket, 200 kg drum
IT9900 Ceramic-based Water Repellent Clear, water-based repellent that soaks into the surface and stops water and dirt getting in. 5 gallon bucket
CC602N Epoxy Asphalt Coating Two-part coating for bare steel and concrete that waterproofs and resists corrosion. 1 gallon set: Part A 4 kg, Part B 0.66 kg. 5 gallon set: Part A 20 kg, Part B 3.3 kg