Drag to turn
910ABT
Self-levelling Epoxy Topcoat
Solvent-free, self-levelling epoxy top coat that leaves a smooth, tough film.
- Group
- Floor coatings
Where to use it
- Concrete floors of factories, clean rooms, hospitals, offices, exhibition halls and workshops
What it does well
- Excellent mechanical strength and wear resistance
- Excellent adhesion, easy to clean
- Highly protective
How to use 910ABT
Four steps, as printed in the Aftek catalogue. Where the catalogue is silent we say so - ask for the data sheet.
- Goes over 910SP primer and 915ABM2 midcoat.
1 partPart B
4 partsPart A
- Mix Part A and Part B in the ratio 4 : 1.
- Use the mix within about 30 minutes (at 25°C).
- For indoor floors. The catalogue rates this system as not suitable outdoors.
- Tack free in about 6 hours (at 25°C).
- Apply the next coat after at least 20 hours and within 5 days (at 25°C).
Source: Aftek catalogue: All Products p.50-51
Jobs it is part of
910ABT in the order of the full Aftek system.
More in Floor coatings
910SP Epoxy Floor Primer, Solvent-based Clear two-part epoxy primer that makes the floor coating grip the concrete. 
920SP Epoxy Floor Primer, Solvent-free Clear two-part, solvent-free epoxy primer for concrete floors. 
915ABM2 Self-levelling Epoxy Midcoat Solvent-free, self-levelling epoxy middle coat for clean, hard-wearing floors. 
926T Epoxy Topcoat, Solvent-based Solvent-based epoxy floor top coat.