Drag to turn
915ABM2
Self-levelling Epoxy Midcoat
Solvent-free, self-levelling epoxy middle coat for clean, hard-wearing floors.
- Group
- Floor coatings
Where to use it
- Concrete floors of factories, clean rooms, hospitals, offices, exhibition halls and workshops
What it does well
How to use 915ABM2
Four steps, as printed in the Aftek catalogue. Where the catalogue is silent we say so - ask for the data sheet.
- Prime the concrete with 910SP first.
1 partPart B
2 partsPart A
- Mix Part A and Part B in the ratio 2 : 1.
- Use the mix within about 30 minutes (at 25°C).
The catalogue does not give this step. Ask us for the product data sheet before you start.
- Tack free in about 5 hours (at 25°C).
- Apply the next coat after at least 18 hours and within 5 days (at 25°C).
Source: Aftek catalogue: All Products p.50-51
Jobs it is part of
915ABM2 in the order of the full Aftek system.
More in Floor coatings
910SP Epoxy Floor Primer, Solvent-based Clear two-part epoxy primer that makes the floor coating grip the concrete. 
920SP Epoxy Floor Primer, Solvent-free Clear two-part, solvent-free epoxy primer for concrete floors. 
910ABT Self-levelling Epoxy Topcoat Solvent-free, self-levelling epoxy top coat that leaves a smooth, tough film. 
926T Epoxy Topcoat, Solvent-based Solvent-based epoxy floor top coat.