Drag to turn
920SP
Epoxy Floor Primer, Solvent-free
Clear two-part, solvent-free epoxy primer for concrete floors.
- Colour
- Transparent
- Group
- Floor coatings
Where to use it
- Concrete floors of factories, clean rooms, hospitals, offices, exhibition halls and workshops
What it does well
How to use 920SP
Four steps, as printed in the Aftek catalogue. Where the catalogue is silent we say so - ask for the data sheet.
- Concrete strength of at least 3,500 psi is asked for these floor systems.
1 partPart B
2 partsPart A
- Mix Part A and Part B in the ratio 2 : 1.
- Use the mix within about 1 hour (at 25°C).
The catalogue does not give this step. Ask us for the product data sheet before you start.
- Tack free in about 4 hours (at 25°C).
- Apply the next coat after at least 12 hours and within 5 days (at 25°C).
Source: Aftek catalogue: All Products p.50-51
More in Floor coatings
910SP Epoxy Floor Primer, Solvent-based Clear two-part epoxy primer that makes the floor coating grip the concrete. 
915ABM2 Self-levelling Epoxy Midcoat Solvent-free, self-levelling epoxy middle coat for clean, hard-wearing floors. 
910ABT Self-levelling Epoxy Topcoat Solvent-free, self-levelling epoxy top coat that leaves a smooth, tough film. 
926T Epoxy Topcoat, Solvent-based Solvent-based epoxy floor top coat.